|
|
|
|
 |
ZT SERIES » Specifications |
| |
|
SPECIFICATIONS |
26 HP BRIGGS & STRATTON ELS |
23 HP VANGUARD |
| Cutting Width |
3600/36"; 5000/50"; 6000/60" |
3600/36"; 5000/50"; 6000/60" |
| Cutting Height |
1.5"–5" with Deck Height Control System |
1.5"–5" with Deck Height Control System |
| Blades |
3600/1/4" x 2 1/2" x 18", High Lift, Heat Treated
5000/1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated
6000/1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated |
3600/1/4" x 2 1/2" x 18", High Lift, Heat Treated
5000/1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated
6000/1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated |
| Lift and Height Adjustment |
Instant Lift Electronic Actuator |
Instant Lift Electronic Actuator |
| Blade Belt |
Single V-Belt Spring Tension |
Single V-Belt Spring Tension |
| Anti-Scalp Rollers |
3600/4 Total (1 On Each Corner, 2 In Rear)
5000/6000/6 Total (2 Front, 2 Rear, 1 On Each Corner) |
3600/4 Total (1 On Each Corner, 2 In Rear)
5000/6000/6 Total (2 Front, 2 Rear, 1 On Each Corner) |
| Deck Flotation |
Floats on 2 Chains & 2 Front Leveling Arms |
Floats on 2 Chains & 2 Front Leveling Arms |
| Deck Thickness |
3/16" Thick Solid Steel |
3/16" Thick Solid Steel |
| ENGINE |
|
|
| Gross Horsepower |
26HP Air-Cooled Briggs & Stratton Inteck ELS |
23HP Air-Cooled Vanguard |
| Cylinders |
90 Degree V-Twin |
90 Degree V-Twin |
| Displacement |
721 cc |
627 cc |
| Maximum Torque |
33 ft. lbs. @ 2600 RPM |
32.9 ft. lbs. @ 2600 RPM |
| Fuel Requirement |
Unleaded Gasoline (87 Octane or higher) |
Unleaded Gasoline (87 Octane or higher) |
| Fuel Capacity |
14 Gallons |
14 Gallons |
| Fuel Filter |
Replaceable Automotive Type |
Replaceable Automotive Type |
| Cooling System |
Air-Cooled |
Air-Cooled |
| Ignition |
Electronic |
Electronic |
| Starter |
12 Volt |
12 Volt |
| Charging System |
16 amp |
16 amp |
|
DRIVE SYSTEM |
|
|
|
Transmission |
Dual Integrated Hydrostatic Transaxle |
Dual Integrated Hydrostatic Transaxle |
|
Pump Drive |
Integrated Axial Piston Pump & Motor w/Gear Reduction |
Integrated Axial Piston Pump & Motor w/Gear Reduction |
|
Wheel Drive |
Integrated with Commercial Grade Gear Reduction |
Integrated with Commercial Grade Gear Reduction |
|
Hydrostatic System Oil |
20W50 Motor Oil |
20W50 Motor Oil |
|
Hydraulic Filter |
25 Micron, Replaceable Spin-On Type, 1 Per Pump |
25 Micron, Replaceable Spin-On Type, 1 Per Pump |
| Pumps (2) |
Pump and Motor Integrated in one unit |
Pump and Motor Integrated in one unit |
|
Hydraulic Coolers (2) |
7" Cooling Fan per Unit |
7" Cooling Fan per Unit |
| WEIGHT |
3600/750 lbs; 5000/775 lbs; 6000/800 lbs |
3600/750 lbs; 5000/775 lbs; 6000/800 lbs |
|
Overall Height |
46" |
46" |
|
Overall Width |
3600/36"; 4800/49 1/2"; 6000/61 1/2" |
3600/36"; 4800/49 1/2"; 6000/61 1/2" |
|
Overall Length |
74 1/2" |
74 1/2" |
|
Tire to Tire Width |
45" |
45" |
|
Tires—Front |
13 x 6.5–6 Smooth Tread |
13 x 6.5–6 Smooth Tread |
|
Tires—Rear |
3600/21 x 7–10 Turf Tread
5000/6000/20 x 10–8 Turf Tread |
3600/21 x 7–10 Turf Tread
5000/6000/20 x 10–8 Turf Tread |
| Steering |
Dual Lever Steering, Independent Control |
Dual Lever Steering, Independent Control |
|
Turning Radius |
Zero Degree, Turns Within Unit Length |
Zero Degree, Turns Within Unit Length |
|
Ground Speed (forward) |
0–7 mph |
0–7 mph |
|
Parking Brake |
Internal Parking Brake |
Internal Parking Brake | |
|
|
|
|
|
|
|
|
