Compare the new ZT Elite with any other lawn mower and you'll find there’s no comparison. The same construction from our professional line of commercial mowers is at the core of this zero-turn marvel. 1/2" steel front forks, 2" x 2" tubular steel framing and 7-gauge solid steel deck powered by high-horsepower engines usually reserved for commercial mower models, the numbers all add up to the best value in a residential lawn mower ANYWHERE. With improved SteerTek precision drive, even more robust hydraulic system and over-all upgrades in comfort, operation and drive-ability, the ZT Elite just raised the bar again — on itself.
PRICES START AT
$4,499
Subject to change.
Financing, destination and setup charges not included.
SELECT ENGINE MODEL
PRICES START AT
$4,499
Subject to change.
Financing, destination and setup charges not included.
Financing, destination and setup charges not included.
WORRY-FREE WARRANTY
Two-year drive, spindle and clutch systems warranty.
| MOWER | |
|---|---|
| Cutting Width | 4800 - 48" ; 6000 - 60" |
| Cutting Height | 1.5" - 4" with Deck Height Control System |
| Blades | 4800 - 1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated 6000 - 1/4" x 2 1/2" x 20 1/2", High Lift, Heat Treated |
| Lift and Height Adjustment | Instant Lift Electronic Actuator |
| Blade Belt | Single V-Belt Spring Tension |
| Anti-Scalp Rollers | 4800 - 4 Total (2 On Front, 2 In Rear) 6000 - 6 Total (4 On Front, 2 In Rear) |
| Deck Flotation | Floats on 2 Chains & 2 Front Leveling Arms |
| Deck Thickness | 3/16" Thick Solid Steel |
| ENGINE | |
| Gross Horsepower | Air-Cooled Kawasaki FR |
| Cylinders | Two Cylinder |
| Displacement | 726 cc |
| Maximum Torque | 42 ft. lbs. @ 2,600 RPM |
| Fuel Requirement | Unleaded Gasoline (87 Octane or Higher) |
| Fuel Capacity | 11 Gallons |
| Fuel Filter | Replaceable Automotive Type |
| Cooling System | Air-Cooled |
| Ignition | Electric |
| Starter | 12 Volt |
| Charging System | 20 Amp |
| DRIVE SYSTEM | |
| Transmission | Dual Integrated Hydrostatic Transaxle |
| Pump Drive | Integrated Axial Piston Pump & Motor w/Gear Reduction |
| Wheel Drive | Integrated with Commercial Grade Gear Reduction |
| Hydrostatic System Oil | 20W50 Motor Oil |
| Hydraulic Filter | 25 Micron, Replaceable Spin-On Type, 1 Per Axle |
| Pumps (2) | 10cc Pump and Motor Integrated In One Unit |
| Hydraulic Coolers (2) | 7" Cooling Fan Per Unit |
| DIMENSIONS | |
| Weight | 4800 - 804 lbs ; 6000 - 858 lbs. |
| Overall Height | 46" |
| Overall Width | 4800 - 49 1/2" ; 6000 - 61 1/2" |
| Overall Length | 74 1/2" |
| Tire to Tire Width | 45" |
| Tires - Front | 13 x 6.5 - 6 Smooth Tread |
| Tires - Rear | 22 x 10 - 8 Turf Tread |
| Steering | Dual Level Steering, Independent Control |
| Turning Radius | Zero Degree, Turns Within Unit Length |
| Ground Speed (Forward) | Up To 7 mph |
| Parking Brake | Internal Parking Brake |
Photos
Videos
360º View
Wallpapers
