SELECT ENGINE MODEL

PRICES START AT
$5,799
Subject to change.
Financing, destination and setup charges not included.
WORRY-FREE WARRANTY
Two-year drive, spindle and clutch systems warranty.
MOWER  
Cutting Width 4800 - 48" ; 5400 - 54"
Cutting Height 1" - 4" with Deck Height Control System
Blades 4800 - 1/4" x 2 1/2" x 16 1/2", High Lift, Heat Treated
5400 - 1/4" x 2 1/2" x 18 3/4", High Lift, Heat Treated
Lift and Height Adjustment Electric Deck Lift
Blade Belt Single V-Belt Spring Tension
Anti-Scalp Rollers 4 Total (2 Front, 2 Rear)
Deck Flotation Floats on 2 Chains and 2 Front Leveling Arms
Deck Thickness 3/16" Thick Solid Steel

ENGINE  
Gross HP/CC 810cc Briggs Commercial Cyclonic
Cylinders 90 Degree V-Twin
Displacement 810 cc
Maximum Torque 42 ft. lbs. @ 2,400 RPM
Fuel Requirement Unleaded Gasoline (87 Octane or Higher)
Fuel Capacity 5 Gallons
Fuel Filter Replaceable Automotive Type
Cooling System Air-Cooled
Ignition Electric
Starter 12 Volt
Charging System 20 Amp

DRIVE SYSTEM  
Transmission Heavy-Duty Dual Integrated Hydrostatic Transaxle
Pump Drive Integrated Axial Piston Pump & Motor w/Gear Reduction
Wheel Drive Integrated with Commercial Grade Gear Reduction
Hydrostatic System Oil 20W50 Motor Oil
Hydraulic Filter 25 Micron, Replacable Spin-On Type, 1 Per Axle
Pumps (2) 12cc Pump & Motor Integrated In One Unit
Hydraulic Coolers (2) 7" Cooling Fan Per Unit

DIMENSIONS  
Weight 4800 - 862 lbs. ; 5400 - 871 lbs.
Overall Height 50 1/2"
Overall Width 4800 - 49 1/2" ; 5400 - 55 1/2"
Overall Length 75"
Tire to Tire Width 4800 - 42 3/8" ; 5400 - 48 1/2"
Tires - Front 13 x 6.5 - 6 Smooth Tread
Tires - Rear 4800 - 23 x 8.5 x 12 - Turf Tread ; 5400 - 23 x 10.50 x 12 - Turf Tread
Steering Dual Level Steering, Independent Control
Turning Radius Zero Degree, Turns Within Unit Length
Ground Speed (Forward) Up To 9 mph
Parking Brake Internal Parking Brake

Powerful Engines

810cc Briggs Cyclone or 726cc Kawasaki Engine options for 9 mph performance and the day-in and day-out demands of commercial use.

All Steel Frame

2" x 2" Tubular Steel Framing creates a rigid, solid steel chassis built for years and years of rugged service.

Outlaw Stand-On


  • Request A Bad Boy Mowers Catalog
  • Find A Bad Boy Dealer Near You
  • Learn About Our Strength From Within
  • Check Out Our Featured Videos
  • See Our Full Lineup Of Mower Options & Accessories
  • See What Gives Us The Bad Boy Advantage
  • Bad Boy's Mower Expert - Mr. Know It All
  • Join Our Mailing List
  • Look Us Up, We're Plenty Social